|
|
@ -0,0 +1,192 @@ |
|
|
|
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.4.2-hardened-cit-2] (local build) |
|
|
|
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org |
|
|
|
|
|
|
|
=== START OF INFORMATION SECTION === |
|
|
|
Model Family: Western Digital RE2-GP |
|
|
|
Device Model: WDC WD1000FYPS-01ZKB0 |
|
|
|
Serial Number: WD-WCASJ0657732 |
|
|
|
LU WWN Device Id: 5 0014ee 2ab796fcb |
|
|
|
Firmware Version: 02.01B01 |
|
|
|
User Capacity: 1,000,204,886,016 bytes [1.00 TB] |
|
|
|
Sector Size: 512 bytes logical/physical |
|
|
|
Rotation Rate: 5400 rpm |
|
|
|
Device is: In smartctl database [for details use: -P show] |
|
|
|
ATA Version is: ATA8-ACS (minor revision not indicated) |
|
|
|
SATA Version is: SATA 2.5, 3.0 Gb/s |
|
|
|
Local Time is: Mon May 2 08:40:23 2016 CEST |
|
|
|
SMART support is: Available - device has SMART capability. |
|
|
|
SMART support is: Enabled |
|
|
|
|
|
|
|
=== START OF READ SMART DATA SECTION === |
|
|
|
SMART overall-health self-assessment test result: PASSED |
|
|
|
|
|
|
|
General SMART Values: |
|
|
|
Offline data collection status: (0x82) Offline data collection activity |
|
|
|
was completed without error. |
|
|
|
Auto Offline Data Collection: Enabled. |
|
|
|
Self-test execution status: ( 0) The previous self-test routine completed |
|
|
|
without error or no self-test has ever |
|
|
|
been run. |
|
|
|
Total time to complete Offline |
|
|
|
data collection: (25560) seconds. |
|
|
|
Offline data collection |
|
|
|
capabilities: (0x7b) SMART execute Offline immediate. |
|
|
|
Auto Offline data collection on/off support. |
|
|
|
Suspend Offline collection upon new |
|
|
|
command. |
|
|
|
Offline surface scan supported. |
|
|
|
Self-test supported. |
|
|
|
Conveyance Self-test supported. |
|
|
|
Selective Self-test supported. |
|
|
|
SMART capabilities: (0x0003) Saves SMART data before entering |
|
|
|
power-saving mode. |
|
|
|
Supports SMART auto save timer. |
|
|
|
Error logging capability: (0x01) Error logging supported. |
|
|
|
General Purpose Logging supported. |
|
|
|
Short self-test routine |
|
|
|
recommended polling time: ( 2) minutes. |
|
|
|
Extended self-test routine |
|
|
|
recommended polling time: ( 293) minutes. |
|
|
|
Conveyance self-test routine |
|
|
|
recommended polling time: ( 5) minutes. |
|
|
|
SCT capabilities: (0x303f) SCT Status supported. |
|
|
|
SCT Error Recovery Control supported. |
|
|
|
SCT Feature Control supported. |
|
|
|
SCT Data Table supported. |
|
|
|
|
|
|
|
SMART Attributes Data Structure revision number: 16 |
|
|
|
Vendor Specific SMART Attributes with Thresholds: |
|
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
|
|
|
1 Raw_Read_Error_Rate 0x000f 200 199 051 Pre-fail Always - 17 |
|
|
|
3 Spin_Up_Time 0x0003 180 177 021 Pre-fail Always - 7966 |
|
|
|
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 97 |
|
|
|
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 |
|
|
|
7 Seek_Error_Rate 0x000e 100 253 000 Old_age Always - 0 |
|
|
|
9 Power_On_Hours 0x0032 026 026 000 Old_age Always - 54234 |
|
|
|
10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0 |
|
|
|
11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 |
|
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 97 |
|
|
|
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 332 |
|
|
|
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1643266 |
|
|
|
194 Temperature_Celsius 0x0022 122 094 000 Old_age Always - 30 |
|
|
|
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 |
|
|
|
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 4 |
|
|
|
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 4 |
|
|
|
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 |
|
|
|
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 |
|
|
|
|
|
|
|
SMART Error Log Version: 1 |
|
|
|
ATA Error Count: 32 (device log contains only the most recent five errors) |
|
|
|
CR = Command Register [HEX] |
|
|
|
FR = Features Register [HEX] |
|
|
|
SC = Sector Count Register [HEX] |
|
|
|
SN = Sector Number Register [HEX] |
|
|
|
CL = Cylinder Low Register [HEX] |
|
|
|
CH = Cylinder High Register [HEX] |
|
|
|
DH = Device/Head Register [HEX] |
|
|
|
DC = Device Command Register [HEX] |
|
|
|
ER = Error register [HEX] |
|
|
|
ST = Status register [HEX] |
|
|
|
Powered_Up_Time is measured from power on, and printed as |
|
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
|
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
|
|
|
|
|
|
|
Error 32 occurred at disk power-on lifetime: 54186 hours (2257 days + 18 hours) |
|
|
|
When the command that caused the error occurred, the device was active or idle. |
|
|
|
|
|
|
|
After command completion occurred, registers were: |
|
|
|
ER ST SC SN CL CH DH |
|
|
|
-- -- -- -- -- -- -- |
|
|
|
40 51 00 ca 1a 40 40 Error: UNC at LBA = 0x00401aca = 4201162 |
|
|
|
|
|
|
|
Commands leading to the command that caused the error were: |
|
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
|
|
|
-- -- -- -- -- -- -- -- ---------------- -------------------- |
|
|
|
60 00 00 80 1a 40 73 08 15d+02:47:11.908 READ FPDMA QUEUED |
|
|
|
ef aa 00 00 00 00 00 08 15d+02:47:11.908 SET FEATURES [Enable read look-ahead] |
|
|
|
ef 03 46 00 00 00 00 08 15d+02:47:11.908 SET FEATURES [Set transfer mode] |
|
|
|
ef 02 00 00 00 00 00 08 15d+02:47:11.908 SET FEATURES [Enable write cache] |
|
|
|
ef 03 0c 00 00 00 00 08 15d+02:47:11.908 SET FEATURES [Set transfer mode] |
|
|
|
|
|
|
|
Error 31 occurred at disk power-on lifetime: 54186 hours (2257 days + 18 hours) |
|
|
|
When the command that caused the error occurred, the device was active or idle. |
|
|
|
|
|
|
|
After command completion occurred, registers were: |
|
|
|
ER ST SC SN CL CH DH |
|
|
|
-- -- -- -- -- -- -- |
|
|
|
40 51 00 ca 1a 40 40 Error: UNC at LBA = 0x00401aca = 4201162 |
|
|
|
|
|
|
|
Commands leading to the command that caused the error were: |
|
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
|
|
|
-- -- -- -- -- -- -- -- ---------------- -------------------- |
|
|
|
60 00 68 00 51 40 73 08 15d+02:47:06.731 READ FPDMA QUEUED |
|
|
|
60 00 60 00 50 40 73 08 15d+02:47:06.731 READ FPDMA QUEUED |
|
|
|
60 00 58 00 4f 40 73 08 15d+02:47:06.731 READ FPDMA QUEUED |
|
|
|
60 38 50 90 e3 3b 3a 08 15d+02:47:06.731 READ FPDMA QUEUED |
|
|
|
60 80 48 80 1e 40 73 08 15d+02:47:06.730 READ FPDMA QUEUED |
|
|
|
|
|
|
|
Error 30 occurred at disk power-on lifetime: 54186 hours (2257 days + 18 hours) |
|
|
|
When the command that caused the error occurred, the device was active or idle. |
|
|
|
|
|
|
|
After command completion occurred, registers were: |
|
|
|
ER ST SC SN CL CH DH |
|
|
|
-- -- -- -- -- -- -- |
|
|
|
40 51 00 95 13 40 40 Error: UNC at LBA = 0x00401395 = 4199317 |
|
|
|
|
|
|
|
Commands leading to the command that caused the error were: |
|
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
|
|
|
-- -- -- -- -- -- -- -- ---------------- -------------------- |
|
|
|
60 00 00 80 13 40 73 08 15d+02:47:01.722 READ FPDMA QUEUED |
|
|
|
ef aa 00 00 00 00 00 08 15d+02:47:01.722 SET FEATURES [Enable read look-ahead] |
|
|
|
ef 03 46 00 00 00 00 08 15d+02:47:01.722 SET FEATURES [Set transfer mode] |
|
|
|
ef 02 00 00 00 00 00 08 15d+02:47:01.722 SET FEATURES [Enable write cache] |
|
|
|
ef 03 0c 00 00 00 00 08 15d+02:47:01.722 SET FEATURES [Set transfer mode] |
|
|
|
|
|
|
|
Error 29 occurred at disk power-on lifetime: 54186 hours (2257 days + 18 hours) |
|
|
|
When the command that caused the error occurred, the device was active or idle. |
|
|
|
|
|
|
|
After command completion occurred, registers were: |
|
|
|
ER ST SC SN CL CH DH |
|
|
|
-- -- -- -- -- -- -- |
|
|
|
40 51 00 95 13 40 40 Error: UNC at LBA = 0x00401395 = 4199317 |
|
|
|
|
|
|
|
Commands leading to the command that caused the error were: |
|
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
|
|
|
-- -- -- -- -- -- -- -- ---------------- -------------------- |
|
|
|
60 00 e8 00 51 40 73 08 15d+02:46:55.570 READ FPDMA QUEUED |
|
|
|
60 00 e0 00 50 40 73 08 15d+02:46:55.570 READ FPDMA QUEUED |
|
|
|
60 00 d8 00 4f 40 73 08 15d+02:46:55.570 READ FPDMA QUEUED |
|
|
|
60 38 d0 90 e3 3b 3a 08 15d+02:46:55.570 READ FPDMA QUEUED |
|
|
|
60 80 c8 80 1e 40 73 08 15d+02:46:55.570 READ FPDMA QUEUED |
|
|
|
|
|
|
|
Error 28 occurred at disk power-on lifetime: 54186 hours (2257 days + 18 hours) |
|
|
|
When the command that caused the error occurred, the device was active or idle. |
|
|
|
|
|
|
|
After command completion occurred, registers were: |
|
|
|
ER ST SC SN CL CH DH |
|
|
|
-- -- -- -- -- -- -- |
|
|
|
40 51 00 e9 04 40 40 Error: UNC at LBA = 0x004004e9 = 4195561 |
|
|
|
|
|
|
|
Commands leading to the command that caused the error were: |
|
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
|
|
|
-- -- -- -- -- -- -- -- ---------------- -------------------- |
|
|
|
60 00 00 80 04 40 73 08 15d+02:46:50.338 READ FPDMA QUEUED |
|
|
|
ef aa 00 00 00 00 00 08 15d+02:46:50.338 SET FEATURES [Enable read look-ahead] |
|
|
|
ef 03 46 00 00 00 00 08 15d+02:46:50.338 SET FEATURES [Set transfer mode] |
|
|
|
ef 02 00 00 00 00 00 08 15d+02:46:50.338 SET FEATURES [Enable write cache] |
|
|
|
ef 03 0c 00 00 00 00 08 15d+02:46:50.338 SET FEATURES [Set transfer mode] |
|
|
|
|
|
|
|
SMART Self-test log structure revision number 1 |
|
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|
|
|
# 1 Extended offline Completed without error 00% 52852 - |
|
|
|
|
|
|
|
SMART Selective self-test log data structure revision number 1 |
|
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|
|
|
1 0 0 Not_testing |
|
|
|
2 0 0 Not_testing |
|
|
|
3 0 0 Not_testing |
|
|
|
4 0 0 Not_testing |
|
|
|
5 0 0 Not_testing |
|
|
|
Selective self-test flags (0x0): |
|
|
|
After scanning selected spans, do NOT read-scan remainder of disk. |
|
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay. |